Technical Parameters
Item | Technical parameters | ||
Model | SLB 5V 60A 8CH | ||
Channel number | 8CH | ||
Control method | Independent control for each channel, current and voltage four-wire system collection | ||
Characteristics | Constant current source and constant voltage source, double closed loop structure | ||
Input resistance | ≥1MΩ | ||
Voltage |
Range |
Charge | 10mV-5V ( tester port ) |
Discharge | 1V-5V( tester port ),The minimum discharge voltage is related to the line length | ||
Precision | ±0.1% of FS, Ambient temperature 15℃-35℃ | ||
Current |
Range |
Charge | 120mA-60A |
Discharge | 120mA-60A | ||
Precision | ±0.1% of FS, Ambient temperature 15℃-35℃ | ||
Power |
Single channel | 300W | |
Stability | 0.2% of FS | ||
Time | ≤10ms (Current response time) | ||
Data record |
Frequency | 1Hz | |
Data recording conditions |
Minimum time interval:1S | ||
Minimum voltage interval:1mV | |||
Minimum current interval:1mA | |||
Charge |
Charging mode | Constant current charging, constant voltage charging, constant current constant voltage charging, constant power charging | |
Cut-off condition | Voltage, current, relative time, capacity, -△V | ||
Discharge |
Discharge mode | Constant current discharge, constant power discharge, constant resistance discharge | |
Cut-off condition | Voltage, current, relative time, capacity, -△V | ||
Pulse mode Optional |
Charge | Constant current mode, constant power mode |
Discharge | Constant current mode, constant power mode | |
Minimum pulse width | Recommended above 5S | |
Cut-off condition | Voltage, relative time |
Item | Technical parameters | |
DCIR | Optional | Support custom pick points for DCIR calculation |
Cycle |
Loop test | 199 commands can be set, 65535 cycles can be set |
Loop nesting | Support 5 levels of loop nesting | |
Protection |
Software protection |
Support power-down data protection |
Support continuous start (the computer should have UPS power) | ||
Overvoltage protection, under voltage protection, capacity protection, overcurrent protection, undercurrent protection | ||
Anti-reverse protection | ||
Data export method | Excel, PDF | |
cooling method | Wind cooling | |
Equipment noise | ≤60dB | |
Communication | RJ45 network port communication | |
Dimensions | ||
Display screen | ||
System Requirements | Windows XP and above |
Environment Requirements
Item | Technical parameters |
Working temperature | 0℃-40℃ |
Storage temperature | -10℃-65℃ |
Relative humidity of working environment | ≤70% RH (No condensation) |
Relative humidity of storage environment | ≤80% RH (No condensation) |
Input active power | 2700W |
Input power | AC220V±10%/50Hz,Other power specifications are optional |
Fixture type | |
Other requirements |