Semco SI SSWM 3X 5000A/6000A/8000A – Single Side Automatic Spot Welding Machine – Pnuematic/Fully Electric

Semco SI SSWM 3X 5000A/6000A/8000A – Single Side Automatic Spot Welding Machine – Pnuematic/Fully Electric

Semco SI SSWM 3X 5000A - Single Side Automatic Spot Welding Machine - Pnuematic

1. Introduction to the equipment
SI SSWM 3X 5000A automatic spot welding machine is a multi-axis motion controller developed by
modern automation expert technology, with precision transmission and motor control mechanism,
automatic walking mechanism, precision welding power supply, and effective real-time control processing
automatic production equipment.
Combined with the company’s many years of experience in spot welding in the lithium battery industry,
we develop and design for the application scenarios in the automatic welding production of lithium
battery packs. The welding efficiency is high, the welding quality is good, the positioning is accurate, it is
suitable for many products, the performance is stable, and the maintenance is simple and convenient. It
is the first choice for automatic welding production such as lithium battery PACK welding.
2. Equipment action flow
Load cells/supports/batteries into the fixture→→Place the fixture to the induction position →→
Automatic spot welding of the equipment→→Manually flip and automatically weld the other side →→
Remove the battery pack from the fixture→→Continue uninterrupted at the left and right positions Spot
welding production.
3. The overall dimensions and appearance of the equipment (width*length*height):
1000*800*1680 (this size is for reference only).

4. Main features:
4.1. Double-station non-stop continuous automatic spot welding operation.
4.2. Automatic welding current monitoring and alarm function.
4.3. Forced escape loop water cooling function.
4.4. Rotating welding head can spot weld nickel plates with different angles. (Optional function)
4.5. The anti-sticking needle function can be turned on and off by rotating the welding needle. (Optional
4.6. All imported servo motor configuration.
4.7. Electric drive pressure welding head to make the pressure more precise.
4.8. Automatic alarm for defective solder joints, manual control and automatic positioning repair
4.9. A variety of programming methods, easy to learn.
4.10. Three-level operating authority setting, convenient file management.
4.11. The energy of different solder joints can be switched during the welding process.
4.12. Output setting, production counting, quantitative shutdown.
4.13. Set the number of times the solder pins are used, and remind the solder pins to maintain after
reaching the stipulation.
5. Equipment technical parameters
5.1 Power supply specifications: Power supply: single-phase 220V 50/60HZ 2.8KW.

5.2 Air source specifications: Air supply connector PP20, trachea PU D=8MM L=2M, pressure 0.3MP-
0.8MP, flow rate 0.02M2/h.

5.3 Equipment weight: 126KG
5.4 Maximum stroke: X 600MM, Y 400MM.
5.5 Workpiece height: 50MM—200MM
5.6 Welding pin pressing stroke: 10—30MM
5.7 Welding head pressure: 1-5KGF, optional and adjustable
5.8 Configuration welding pin chuck: 1.7MM imported spot welding pin and chuck (optional)
5.9 Welding head rotation angle: 90O ((Need to be customized)
5.10 Welding platform load: 35KG (maximum)
5.11 Welding speed: 3000 points/hour

5.12 Number of operators: 1
5.13 Equipment environmental requirements:
5.13.1 Ambient temperature: 0°C-40°C.
5.13.2 Relative humidity: 30%~85%.
5.13.3 Atmospheric pressure: 750±30mmHg.
5.13.4 There is no strong electromagnetic field interference and corrosive gas erosion.
5.13.5 Measure 1000mm away from the outer wall of the machine.
5.13.6 The equipment complies with the national safety standards of relevant equipment.


  1. Main configuration
S. No. Configuration Quantity Brand
1 Transistor welding power supply 1 set Red Lopard
2 Motion Controller 1 set Control
3 Touch screen 1 piece Weilun
4 servo motor 3 sets Matsushita
5 Stepper motor 1 piece Lei Sai/Penghui
6 The electromagnetic valve 2 pcs AirTAC
7 Bearing seat 2 sets TBI
8 Linear Guides 3 sets Shanghai Bank
9 24V switching power supply 1 piece Zhenghua
10 sensor 5 pcs Omron/Taibang
11 Button + indicator 5 pcs Taiwan
12 Relay 3 pcs Izumi/Chint
13 Water circulation cooling system 1 set Red Leopard
  1. Equipment configuration and accessories list
S.No. Name Brand Model Quantity Unit Remark
1 Single-sided automatic welding host platform Semco SI SSWM 3X 5000A 1 tower
2 Welding power Semco Transistor MTB- 5000A 1 tower
3 Active escape ring forced water Cold machine DN CW-3000 1 tower (Optional Pieces)
4 Allen wrench Metric 1 set
5 Solder pin Taiwan D=1.7MMX100MM 4 Only 2 only installed
6 Air hose Semco D=8MM L=2M +PP20 1 Piece
7 manual Semco SI SSWM 3X 5000A 1 Book
8 Certificate of conformity Semco SI SSWM 3X 5000A 1 Piece


  1. List of daily consumption materials
S.No. Name Specification Remark
1 Solder pin D=1.7MM
  1. Equipment installation and training content

9.1 Equipment operation

9.1.1 After quickly setting the origin of the workpiece coordinate, it will automatically correspond to each welding this origin.

9.1.2 Adjusting the welding head stroke mechanism

9.1.3 Clamping solder pins

9.1.4 Set welding machine parameters

9.2 Daily maintenance.

9.3 Elimination and maintenance of common faults.

9.4 Use of software:

9.4.1 Personalized writing spot welding program (easy to learn one hour to learn)

9.4.2 Processing programming on the computer


  1. Information provision

Equipment information: equipment operation manual and electronic version.


  1. Equipment acceptance


  1. Delivery acceptance is carried out by the buyer. After the contract equipment arrives at the buyer, the buyer will unpack and accept the contract equipment, inspect the appearance of the contract equipment, and count the quantity of the contract equipment.
  2. The contract equipment is qualified for delivery and acceptance after unpacking, and the buyer will conduct an unpacking acceptance visa for the contract equipment.
  3. The unpacking acceptance is unqualified due to the seller’s design, manufacturing, and transportation quality defects, which delays the visa application. The seller shall bear the responsibility for the installation and commissioning of the equipment in the wrong contract.


  1. Warranty period

The warranty period is twelve months, counting from the date of acceptance. Under normal operating conditions during the warranty period, the seller shall be responsible for free repairs for any failures and losses.


  1. Technical support services

13.1 Training: The seller is responsible for technical training on the operation and maintenance of the buyer’s personnel. After the training, the trainees can independently operate, judge and deal with general failures.

13.2 Cooperate with the buyer to complete the on-site installation and commissioning of the equipment.

13.3 Possess technical support capabilities, after-sales service facilities and spare parts warehouse.

13.4 After receiving the user’s emergency notification of failure, respond within 8 hours. If you need to send someone to the site for maintenance, you should arrive at the user site within hours.

13.5 After the end of the warranty period, the seller will provide lifetime technical support.

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors