1. Technical Parameters
| Item | Technical parameters | ||
| Model | SLB 5V 60A 8CH | ||
| Channel number | 8CH | ||
| Control method | Independent control for each channel, current and voltage four-wire system collection | ||
| Characteristics | Constant current source and constant voltage source, double closed loop structure | ||
| Input resistance | ≥1MΩ | ||
|
Voltage |
Range |
Charge | 10mV-5V ( tester port ) |
| Discharge | 1V-5V( tester port )，The minimum discharge voltage is related to the line length | ||
| Precision | ±0.1% of FS, Ambient temperature 15℃-35℃ | ||
|
Current |
Range |
Charge | 120mA-60A |
| Discharge | 120mA-60A | ||
| Precision | ±0.1% of FS, Ambient temperature 15℃-35℃ | ||
|
Power |
Single channel | 300W | |
| Stability | 0.2% of FS | ||
| Time | ≤10ms (Current response time) | ||
|
Data record |
Frequency | 1Hz | |
|
Data recording conditions |
Minimum time interval：1S | ||
| Minimum voltage interval：1mV | |||
| Minimum current interval：1mA | |||
|
Charge |
Charging mode | Constant current charging, constant voltage charging, constant current constant voltage charging, constant power charging | |
| Cut-off condition | Voltage, current, relative time, capacity, -△V | ||
|
Discharge |
Discharge mode | Constant current discharge, constant power discharge, constant resistance discharge | |
| Cut-off condition | Voltage, current, relative time, capacity, -△V | ||
|
Pulse mode Optional |
Charge | Constant current mode, constant power mode |
| Discharge | Constant current mode, constant power mode | |
| Minimum pulse width | Recommended above 5S | |
| Cut-off condition | Voltage, relative time |
| Item | Technical parameters | |
| DCIR | Optional | Support custom pick points for DCIR calculation |
|
Cycle |
Loop test | 199 commands can be set, 65535 cycles can be set |
| Loop nesting | Support 5 levels of loop nesting | |
|
Protection |
Software protection |
Support power-down data protection |
| Support continuous start (the computer should have UPS power) | ||
| Overvoltage protection, under voltage protection, capacity protection, overcurrent protection, undercurrent protection | ||
| Anti-reverse protection | ||
| Data export method | Excel, PDF | |
| cooling method | Wind cooling | |
| Equipment noise | ≤60dB | |
| Communication | RJ45 network port communication | |
| Dimensions | ||
| Display screen | ||
| System Requirements | Windows XP and above | |
2. Environment Requirements
| Item | Technical parameters |
| Working temperature | 0℃-40℃ |
| Storage temperature | -10℃-65℃ |
| Relative humidity of working environment | ≤70% RH (No condensation) |
| Relative humidity of storage environment | ≤80% RH (No condensation) |
| Input active power | 2700W |
| Input power | AC220V±10%/50Hz,Other power specifications are optional |
| Fixture type | |
| Other requirements |